]
%%%
%%% NUMERACIÓN DE PÁGINAS, SETUP %
%%%
\setuppagenumbering[alternative=doublesided,location={footer,inmargin}]
\setupuserpagenumber[way=byblock]
\starttext
\startsectionblock[portada
versionset=pagenumber]
There is no need to set the number conversion for list.
\startsectionblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\setuppagenumber[number=1]
\stopsectionblockenvironment
No need for these settings because you already changed
lockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\starttext
\startfrontmatter
\dorecurse{25}{\null
\setuplist[subject, section, subsection]
\setupcombinedlist[content][list={subject,section,subsection}, alternative=c]
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][5]
\page
\subject{Vorwort}
\page
\setupuserpagenumber[numberconversion=numbers]
\setcounter
Hi list,
I have successfully managed to get a vertically-oriented page number in
words in the margins, but NOT with the number prefixed by the word
'page'. I thought I would be able to do this by adding viewerprefix=Page
(mentioned on the wiki for \setupuserpagenumber) but it gives me
Willem FlammaSubject: Re: [NTG-context] \setupuserpagenumber not working as expected Jan Willem Flamma schrieb am 03.09.2020 um 10:29:> Dear Julian,> > I use something similar using a main product file, an environment file > that contain the styling and several components t
Jan Willem Flamma schrieb am 03.09.2020 um 10:29:
Dear Julian,
I use something similar using a main product file, an environment file
that contain the styling and several components that build up the
frontmatter, the manual and the appendices.
Below my setup where I start the roman
Credits to Pragma who helped me to set this up a few years ago. From: jbfSent: Friday, 4 September 2020 00:20To: Jan Willem FlammaCc: ntg >> mailing list for ConTeXt usersSubject: Re: [NTG-context] \setupuserpagenumber not working as expected Thanks Jan, that is an extensive bit of work
*From: *jbf <mailto:roma83...@gmail.com>
*Sent: *Thursday, 3 September 2020 06:05
*To: *mailing list for ConTeXt users <mailto:ntg-context@ntg.nl>
*Subject: *[NTG-context] \setupuserpagenumber not working as expected
Am seeking to have frontmatter pages in roman numer
jbf schrieb am 03.09.2020 um 06:32:
Thanks Wolfgang. I did have the respective setupsectionblocks, but
they said [page= ], so I have now changed them to [page=yes] and
things work as expected. I also tried the second \page method you
offered, which, naturally enough, also works. I take it
for ConTeXt usersSubject: [NTG-context] \setupuserpagenumber not working as expected Am seeking to have frontmatter pages in roman numerals and from Chapter 1 onwards in arabic numerals. I have achieved something of the kind, but page 1 (arabic) is appearing on the last page of the frontmatter
]
\startsectionblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\setuplist[chapter][pageconversionset=pagenumber]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setuppagenumber[number=1]
\stopsectionblockenvironment
The frontmatter
]
\setupuserpagenumber[numberconversion=romannumerals]
\setuplist[chapter][pageconversionset=pagenumber]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setuppagenumber[number=1]
\stopsectionblockenvironment
The frontmatter is some 16 pages worth (ends
[userpagenumber][state=start,start=7] is not giving the
expected result.
MWE:
[...]
Is this a bug or do I miss something?
The second one.
The name of the counter isn't "userpagenumber" and you don't even have
to know the name of the counter because \setupuserpagenumber has the
sa
Pablo Rodriguez schrieb am 11.04.2020 um 13:54:
Dear list,
here you have the following sample:
\setuppapersize[A6]
\setupuserpagenumber[way=chapter]
\starttext
\placelist[chapter][counter=realpage]
\dorecurse{5}{\chapter{Chapter}}
\stoptext
Why doesn’t \placelist
Dear list,
here you have the following sample:
\setuppapersize[A6]
\setupuserpagenumber[way=chapter]
\starttext
\placelist[chapter][counter=realpage]
\dorecurse{5}{\chapter{Chapter}}
\stoptext
Why doesn’t \placelist[chapter] use the realpage counter?
According to i
Dear list,
I have the following sample:
\setupuserpagenumber[way=chapter]
\starttext
\dorecurse{5}{\chapter{Chapter}}
\stoptext
I need to restart user page numbers in each part (I use real page to
number the complete document).
But the main problem is this way also restarts
scape]
\setupuserpagenumber[numberconversion=dwarsligger]
\setuppagenumbering[location=none]
\setupheadertexts [\doifoddpageelse{}{\prefixedpagenumber}]
\setupfootertexts [\doifoddpageelse{\prefixedpagenumber}{}]
\usemodule [visual]
\starttext
\completecontent
\dorecurse{10}
{\chapter{\fakewo
letterpercent d",(#1+1)/2}}
\defineconversion [dwarsligger] [\DwarsliggerNumber]
\setuppapersize[A5,landscape]
\setupuserpagenumber[numberconversion=dwarsligger]
\setuppagenumbering[location=none]
\setupheadertexts [\doifoddpageelse{\prefixedpagenumber}{}]
\starttext
\dorecurse{1
,
incrementnumber=list]
\startproduct Danggok
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber][][numbers]
\definestructureconversionset[backpart:pagenumber][][numbers]
\startsectionblockenvironment[frontpart]
\setupuserpagenumber
\define[1]\fnindex{\index[Footnote->]{#1}}
\define[1]\fiindex{\index[Figure->]{#1}}
\defineconversionset [backpart:pagenumber][][backpart->o]
\setupuserpagenumber[way=byblock]
\setuppagenumbering [location=none]
\setupheadertexts[{\convertedcounter[userpage][numberconversionset=
following can help. It has separate user page numbers for the
> main matter and back matter, with a suffixed ‘n’ for the items indexed from
> backmatter pages, but no suffix on the backmatter page numbers. The index
> entries for figures are rubricated and have a leading ‘f’.
>
> \
rt] [style=slanted,right=n]
\defineprocessor [Figure] [style=\tf,color=red,left=f]
\defineconversionset [backpart:pagenumber][][backpart->o]
\setupuserpagenumber[way=byblock]
\setuppagenumbering [location=none]
\setupheadertexts[{\convertedcounter[userpage][numberconvers
in old TOC
<mailto:ursula.herm...@univie.ac.at> Ursula Hermann
15. Juli 2016 um 19:33
Hello Wolfgang!
Yes, I want it both title in header and in the TOC!
Ursula Hermann
Danksagung
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userp
Ursula Hermann <mailto:ursula.herm...@univie.ac.at>
15. Juli 2016 um 19:33
Hello Wolfgang!
Yes, I want it both title in header and in the TOC!
Ursula Hermann
Danksagung
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][2]
The two se
,
alternative=c,
interaction=all]
\setuphead [chapter]
[sectionresetset=,
conversion=,
number=no,
placehead=yes,
bodypartlabel=part,
sectionsegments=chater:chapter]
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][2]
\startchapter
[title
le=yes,
alternative=c,
interaction=all]
\setuphead [chapter]
[sectionresetset=,
conversion=,
number=no,
placehead=yes,
bodypartlabel=part,
sectionsegments=chater:chapter]
\starttext
\placecontent
\setupuserpagenumber[numberconv
]
[sectionresetset=,
conversion=,
number=no,
placehead=yes,
bodypartlabel=part,
sectionsegments=chater:chapter]
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][2]
\startchapter
[title
setset=,
conversion=,
number=no,
placehead=yes,
bodypartlabel=part,
sectionsegments=chater:chapter]
\setuphead [section]
[sectionsegments=section:section]
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannu
=no,
placehead=yes,
bodypartlabel=part,
sectionsegments=chater:chapter]
\setuphead [section]
[sectionsegments=section:section]
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][2]
\startchapter
[title={Ursula
Hello Otared!
At least the example is this. Now it works perfekt:
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][2]
\startchapter
[title={Danksagung}]
\stopchapter
\startchapter
[title={Bildbeschreibung der Cover-Grafik
Hello Otared!
I have it. I found an mail on the mailinglist . This works. It is:
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\setcounter[userpage][5]
\startpart
[title={Danksagung}]
\stoppart
\startchapter
[title={Bildbeschreibung der Cover
ula Hermann <ursula.herm...@univie.ac.at> wrote:
>
> Hello Wolfgang!
>
> I have now written as you told me.
> \starttext
> \placecontent
> \setupuserpagenumber[numberconversion=romannumerals]
> \startchapter
> \startchapter[title={Bildbeschreibung der C
tarttext
> \placecontent
> \setupuserpagenumber[numberconversion=romannumerals]
> \startchapter
> \startchapter[title={Bildbeschreibung der Cover-Grafik}]
> \setupuserpagenumber[numberconversion=numbers]
> \startchapter
> [title={Einleitung:"Entwicklung" behindern?}]
> \stopte
I have now written as you told me.
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\startchapter
\startchapter[title={Bildbeschreibung der Cover-Grafik}]
\setupuserpagenumber[numberconversion=numbers]
\startchapter
[title={Einleitung:"Entwicklung
Ursula Hermann <mailto:ursula.herm...@univie.ac.at>
28. Juni 2016 um 14:15
Hello Wolfgang!
I have now written as you told me.
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\startchapter
\startchapter[title={Bildbeschreibung der Cover-
Hello Wolfgang!
I have now written as you told me.
\starttext
\placecontent
\setupuserpagenumber[numberconversion=romannumerals]
\startchapter
\startchapter[title={Bildbeschreibung der Cover-Grafik}]
\setupuserpagenumber[numberconversion=numbers]
\startchapter
[title={Einleitung
ooking for the \setupuserpagenumber command (but \setuppagenumber would
also work because it’s a synonym for the command) and you have to use the
numbercommand
key to change the conversion.
\setupuserpagenumber[numberconversion=romannumerals]
Wo
bering
\setupcombinedlist[content][list={part,chapter,section,subsection,subsubsection}]
None of the above setups are needed for a minimal example, remove them
next time.
\setupuserpagenumbering[conversion=romannumerals]
You’re looking for the \setupuserpagenumber command (but
\setuppagenumber
fttoright,
location=]
\setupuserpagenumber[numberconversion=Characters] %
numberconversion=arabicdecimals
\starttext
\dorecurse{10}{\expanded{\chapter{Chapter \recurselevel}}}
\stoptext
Wolfgang
___
If your q
> \setupuserpagenumber[numberconversion=Characters]
> Wolfgang
Thank you very much Wolfgang.Its nice seperation of settings and content.
___
If your question is of interest to others as well, please add an
Hello
I am trying to get mashriqi arabic numerals.
i tried
\setupuserpagenumber[numberconversion=arabicnumerals]
but it does not make any change.
___
If your question is of interest to others as well, please add
change?
You can use the dataset command which lets you store other information,
e.g. the current value of the visible pagenumber.
\definedataset[hans][delay=yes]
\setupuserpagenumber[number=3]
\starttext
One\setdataset[hans][one][pagenumber=\userpagenumber]
\page[+2]
Two\setdataset[hans]
umbers]
\definestructureconversionset[backpart:pagenumber] [][numbers]
\startsectionblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setupuserpagenumber[numberconversion=n
al problems
> introduced with new tokenizer in place... (boundary conditions).
>
More complete example for experiments:
(I am not experienced in ConTeXt, most of it was suggested here in the forum,
there are most likely other ways how to accomplish the desired output - see
attac
lines):
...
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\definestructureconversionset[backpart:pagenumber] [][numbers]
\startsectionblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannu
]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\definestructureconversionset[backpart:pagenumber] [][numbers]
\startsectionblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\stopsectionblockenvironment
...
tex error > tex error on line 22 in fil
:
\setupuserpagenumber[way=bypart, prefix=yes, prefixset=part]
The page numbers are formatted correctly on each page, but not in the table
of contents. For example,
\setupuserpagenumber[way=bypart, prefix=yes, prefixset=part]
\starttext
\placelist[part,section][alternative=c, criterium=all
Hi,
I am using a document structure part-section-subsection (i.e., no
chapters). The page numbers have to be formatted as
partnumber-pagenumber. So, I am using the following setup:
\setupuserpagenumber[way=bypart, prefix=yes, prefixset=part]
The page numbers are formatted correctly on each
Aditya Mahajan mailto:adit...@umich.edu
11. August 2015 18:53
Hi,
I am using a document structure part-section-subsection (i.e., no
chapters). The page numbers have to be formatted as
partnumber-pagenumber. So, I am using the following setup:
\setupuserpagenumber[way=bypart, prefix=yes
The new method of handling page numbering (roman
and arabic) using e.g.,
\setupuserpagenumber[numberconversion=Romannumerals]
\setcounter[userpage][5]
works just fine if you remember
one thing: in running heads the word pagenumber
has to be replaced with userpagenumber. But in
the \chapter
this:
\startfrontmatter
\setupuserpagenumber[numberconversion=Romannumerals]
% some stuff
\stopfrontmatter
\startbodymatter
\setupuserpagenumber[numberconversion=numbers]
\setnumber[page]{1}
%some stuff
\stopbodymatter
Hi,
In fact you should use
\setupuserpagenumber[number=1]
as in the following example:
begin example
\starttext
\startfrontmatter
\setupuserpagenumber[numberconversion=Romannumerals]
\input knuth.tex
\stopfrontmatter
\startbodymatter
\setupuserpagenumber[numberconversion=numbers
Thank you! This works.
But tell me: How do you know this? The manual and the website don’t
explain it this way…
Best regards
Werner
On 22 May 2014, at 12:16, Otared Kavian wrote:
Hi,
In fact you should use
\setupuserpagenumber[number=1]
as in the following example:
begin
:
begin example
\defineconversionset[frontpart:pagenumber][][romannumerals]
\defineconversionset[bodypart:pagenumber] [][numbers]
\defineconversionset[backpart:pagenumber] [][characters]
\starttext
\startfrontmatter
\input knuth.tex
\stopfrontmatter
\startbodymatter
\setupuserpagenumber
example
\defineconversionset[frontpart:pagenumber][][romannumerals]
\defineconversionset[bodypart:pagenumber] [][numbers]
\defineconversionset[backpart:pagenumber] [][characters]
\starttext
\startfrontmatter
\input knuth.tex
\stopfrontmatter
\startbodymatter
\setupuserpagenumber[number=1]
\input
]
\defineconversionset[backpart:pagenumber] [][characters
\defineconversionset[appendix:pagenumber][][Characters]
\setupuserpagenumber[numberconversionset=pagenumber,way=byblock]
Now it’s not nessecary to reset the pagenumber.
Thanks for the hint about the Sample texts.
Best regards.
WH
On 22 May 2014
[backpart:pagenumber] [][characters]
\setupuserpagenumber[way=byblock]
\starttext
\startfrontmatter
\placecontent
\stopfrontmatter
\startbodymatter
\chapter{First chapter}
\input ward.tex
\section{A section}
\input dawkins.tex
\stopbodymatter
\startbackmatter
\chapter[title={Index},number=no]
\input
Thanks Wolfgang, it does work now!
I didn't now that the counter would be called 'userpage'. It thought
I had to set the page-counter (\setconter[page][1]), as I was using
\setuppagenumber[numberconversion=numbers,state=start]
and not
\setupuserpagenumber[numberconversion=numbers,state=start
[numberconversion=numbers,state=start]
and not
\setupuserpagenumber[numberconversion=numbers,state=start]
It seems as if both commands have the same effect. Are these synonyms?
Is there a way for an end-user (like me) to infer from a command as
\setuppagenumber that the corresponding counter
anyhow, i'll add this:
\setupuserpagenumber[viewerprefix=titlepage]
\startstandardmakeup
The first page
\stopstandardmakeup
\setupuserpagenumber[viewerprefix=p ]
Thanks Hans. That works great. Is it possible to have ONLY the prefix
(not followed
with an interface for that which also
can be wikified and remembered well
anyhow, i'll add this:
\setupuserpagenumber[viewerprefix=titlepage]
\startstandardmakeup
The first page
\stopstandardmakeup
\setupuserpagenumber[viewerprefix=p ]
so it's a semi-manual job
Hans
\setupuserpagenumber[viewerprefix=titlepage]
\startstandardmakeup
The first page
\stopstandardmakeup
\setupuserpagenumber[viewerprefix=p ]
I'm clearly missing something.
Troy
\setupinteraction[state=start]
\defineconversionset[frontpart:pagenumber][][romannumerals
Am 15.02.2014 um 02:30 schrieb Troy Henderson thend...@gmail.com:
\setupuserpagenumber[viewerprefix=titlepage]
\startstandardmakeup
The first page
\stopstandardmakeup
\setupuserpagenumber[viewerprefix=p ]
I'm clearly missing something.
Have you updated you
are.
mkiv:
\nopdfcompression
\setupinteraction
[state=start]
\defineconversionset[frontpart:pagenumber][][romannumerals]
\defineconversionset[bodypart:pagenumber] [][numbers]
\defineconversionset[appendix:pagenumber] [][Characters]
\setupuserpagenumber[numberconverionset=pagenumber,way
On 03/26/2013 06:07 PM, Wolfgang Schuster wrote:
1. \setuppagenumber is a synonym for \setupuserpagenumber
2. The “number=XX” setting doesn’t work in MkIV and you have to use
\setupcounter.
Thank you for your words of wisdom, Wolfgang. Wouldn't it make sense to
have backwards compatibility
On 3/27/2013 9:21 AM, Thomas A. Schmitz wrote:
On 03/26/2013 06:07 PM, Wolfgang Schuster wrote:
1. \setuppagenumber is a synonym for \setupuserpagenumber
2. The “number=XX” setting doesn’t work in MkIV and you have to use
\setupcounter.
Thank you for your words of wisdom, Wolfgang. Wouldn't
Hi,
shouldn't this work?
\setupuserpagenumber[number=34]
\starttext
\dorecurse{20}{\userpagenumber \page}
\stoptext
I must admit that I'm pretty confused about pagenumbering; there are too
many options of \setup...pagenumber and \setup...pagenumbering for my
simple brain now, and I often
On 2013–03–26 Thomas A. Schmitz wrote:
shouldn't this work?
\setupuserpagenumber[number=34]
I don't know if that's the recommended way, but I set the page
number as follows:
\setcounter [userpage] [34]
Marco
signature.asc
Description: Digital signature
On 03/26/2013 01:54 PM, Marco Patzer wrote:
I don't know if that's the recommended way, but I set the page
number as follows:
\setcounter [userpage] [34]
Thank you. Yes that works, but I thought that \setupuserpagenumber was
the proper way to do those things.
Thomas
that \setupuserpagenumber was the
proper way to do those things.
1. \setuppagenumber is a synonym for \setupuserpagenumber
2. The “number=XX” setting doesn’t work in MkIV and you have to use
\setupcounter.
Wolfgang
___
If your
is the citation added (this is
different, if I put the placepublication command into the bodymatter)
Cheers,
Andreas
% ConTeXt ver: 2013.01.02 18:19 MKIV
%%% minimal example %%%
\setupcombinedlist[content][level=4, alternative=c]
\startsectionblockenvironment[bodypart]
\setupuserpagenumber
]
\setupuserpagenumber[numberconversion=numbers]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\startsectionblockenvironment[backpart]
\setupuserpagenumber[numberconversion=numbers]
\stopsectionblockenvironment
\usemodule[bib]
\usemodule[bibltx]
\setupbibtex[database=sample]
\setuppublications
[numstring][\numstr]
\setupuserpagenumber[numberconversion=numstring]
\starttext
\dorecurse{100}{\recurselevel\page}
\stoptext
I'm such a noob with TeX and I cannot figure out how to do this, and I need
this for this friday!. However, Aditya in the TeX section of StackExchange
(http
:
\input numstr
\defineconversion[numstring][\numstr]
\setupuserpagenumber[numberconversion=numstring]
\starttext
\dorecurse{100}{\recurselevel\page}
\stoptext
I'm such a noob with TeX and I cannot figure out how to do this, and I need
this for this friday!. However, Aditya in the TeX section
Hi Aditya,
Yes it is a strange behaviour and it appears only when using mkiv and reversed
itemize, even with
\setuppagenumber[start=12]
instead of
\setupuserpagenumber[start=12]
Also the pagenumber remains unchanged with either of these commands, which
means that it's a bug
On Thu, 13 Sep 2012, Otared Kavian wrote:
On 13 sept. 2012, at 02:34, Aditya Mahajan adit...@umich.edu wrote:
For some reason, the numbering in itemize is affected by the value of userpage!
\setupuserpagenumber[start=12]
\starttext
\startitemize[n,reverse]
\item One
\item Two
\stopitemize
On Thu, 13 Sep 2012, Aditya Mahajan wrote:
On Thu, 13 Sep 2012, Otared Kavian wrote:
On 13 sept. 2012, at 02:34, Aditya Mahajan adit...@umich.edu wrote:
For some reason, the numbering in itemize is affected by the value of
userpage!
\setupuserpagenumber[start=12]
\starttext
\startitemize
!
\setupuserpagenumber[start=12]
\starttext
\startitemize[n,reverse]
\item One
\item Two
\stopitemize
\stoptext
With ConTeXt 2012.09.11 20:36 I get
13. One
12. Two
Any ideas?
Yes it is a strange behaviour and it appears only when using mkiv and
reversed itemize, even with
\setuppagenumber[start
Hi,
For some reason, the numbering in itemize is affected by the value of
userpage!
\setupuserpagenumber[start=12]
\starttext
\startitemize[n,reverse]
\item One
\item Two
\stopitemize
\stoptext
With ConTeXt 2012.09.11 20:36 I get
13. One
12. Two
Any ideas?
Aditya
What your got is already reversed, isn't it?
On Thu, Sep 13, 2012 at 8:34 AM, Aditya Mahajan adit...@umich.edu wrote:
Hi,
For some reason, the numbering in itemize is affected by the value of
userpage!
\setupuserpagenumber[start=12]
\starttext
\startitemize[n,reverse]
\item One
On Thu, Sep 13, 2012 at 8:34 AM, Aditya Mahajan adit...@umich.edu wrote:
Hi,
For some reason, the numbering in itemize is affected by the value of
userpage!
\setupuserpagenumber[start=12]
\starttext
\startitemize[n,reverse]
\item One
\item Two
\stopitemize
\stoptext
With ConTeXt
=italic]
\setupuserpagenumber[numberconversion=romannumerals] % you can also use
\setuppagenumber which is a synonym for \setupuserpagenumber
Wolfgang___
If your question is of interest to others as well, please add
Hi all,
sorry for bringing the bad news all the time... There are two more bugs
in the latest beta which I just stumbled upon: userpage=bysection does
not work, pdf bookmarks are not produced. Example:
\setupuserpagenumber [state=start,way=bysection]
\setupfootertexts [{\getmarking
\MapsRunningAuthor
{\global\let\MapsRunningAuthor\MapsAuthor}%
\doifnothing\MapsRunningTitle
{\global\let\MapsRunningTitle\MapsTitle}}%
\def\dostartArticle[#1]{%
\MapsBibData[#1]
\pageno=\MapsPage
\setupuserpagenumber[start=\MapsPage]
\startbaselinecorrection
\bgroup
\hsize = 457pt
Hi,
how do I change the page number?
In april and may versions it does not work anymore:
\setuppagenumber[number=5]% no effect
\setuprealpagenumber[number=5]% no effect
\setuppagenumber[number=5]% no effect
%\setupuserpagenumber[numberconversion=Romannumerals]% works OK!
\starttext
]
\startsectionblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals, way=byblock]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setupuserpagenumber[numberconversion=numbers]
\setuppagenumber[number=1]
\stopsectionblockenvironment
\startsectionblockenvironment[backpart
:
\startsectionblockenvironment[frontpart]
\setupheader [before={\ss\switchtobodyfont[10pt]}]
\setupheadertexts [section][pagenumber][pagenumber][chapter]
\setuppagenumbering [alternative=doublesided, partnumber=no, location=,
style={\ss\bold}]
\setupuserpagenumber[numberconversion=romannumerals
[alternative=doublesided, partnumber=no, location=,
style={\ss\bold}]
\setupuserpagenumber[numberconversion=romannumerals]
\stopsectionblockenvironment
\startsectionblockenvironment[bodypart]
\setupheader [before={\ss\switchtobodyfont[10pt]}]
\setupheadertexts [section][pagenumber
effect of this.)
So, now we don't reset any longer unless the 'start' key's value
differs. As a consequence one needs to be explicit in some cases, like
yours. By default, we number per text (we could change that if needed)
but in the past the \setupuserpagenumber triggers a synchronization
) is \setuppagenumber[number=1]
rather than \setuppagenumbering[number=1] (as I understand it
\setuppagenumbering controls the way in which page numbers are
displayed and \setuppagenumber controls the numbers themselves).
There is also \setupuserpagenumber[number=1] and
\setupuserpagenumber[way
Hi Aditya,
On Mon, 21 Nov 2011 15:09:23 -0700, Aditya Mahajan adit...@umich.edu
wrote:
There is also \setupuserpagenumber[number=1] and
\setupuserpagenumber[way=bysuperpart] (if superpart is defined using
\definehead).
Hmm, I was wondering if there was something like this in the system
Am 21.11.2011 um 23:20 schrieb Idris Samawi Hamid ادريس سماوي حامد:
Hi Aditya,
On Mon, 21 Nov 2011 15:09:23 -0700, Aditya Mahajan adit...@umich.edu wrote:
There is also \setupuserpagenumber[number=1] and
\setupuserpagenumber[way=bysuperpart] (if superpart is defined using
\definehead
for the mkii-mkiv problem.
\setupuserpagenumber[numberconversion=romannumerals]
or better (because you can set different conversion for the frontpart, main
part etc)
\definestructureconversionset[pagenumber][][romannumerals]
\setupuserpagenumber[numberconversionset=pagenumber]
Thank you
this
\convertnumber{r}{4}
works as expected.
Is this fixed in a later beta?
There is nothing to fix, the while numbering mechanism has changed in MkIV and
you have to write now
\setupuserpagenumber[numberconversion=romannumerals]
or better (because you can set different conversion
\setupuserpagenumber[numberconversion=romannumerals]
8 \setuppagenumber[number=1]
9 \stopstructureblockenvironment
10
11 \startstructureblockenvironment[bodypart]
12 \setuppagenumber[number=1]
13 \stopstructureblockenvironment
14
15 \startcomponent Test
16
l.6 \startstructureblockenvironment
lines from the file.tex are:
\definestructureconversionset[frontpart:pagenumber][][romannumerals]
\definestructureconversionset[bodypart:pagenumber] [][numbers]
\setuplist[chapter][pageconversionset=pagenumber]
\startstructureblockenvironment[frontpart]
\setupuserpagenumber[numberconversion
] [][numbers]
\setuplist[chapter][pageconversionset=pagenumber]
\startstructureblockenvironment[frontpart]
\setupuserpagenumber[numberconversion=romannumerals]
\setuppagenumber[number=1]
\stopstructureblockenvironment
\startstructureblockenvironment[bodypart]
\setuppagenumber[number=1
]
\setupuserpagenumber[numberconversion=romannumerals]
\setuppagenumber[number=1]
\stopstructureblockenvironment
\startstructureblockenvironment[bodypart]
\setuppagenumber[number=1]
\stopstructureblockenvironment
\starttext
\startfrontmatter
\completecontent[criterium=all]
\chapter{Intro}
\input tufte
]
\setupuserpagenumber[numberconversion=romannumerals]
\setuppagenumber[number=1]
\setuphead[chapter][command=,number=no,page=right]
\stopstructureblockenvironment
\startstructureblockenvironment[bodypart]
\setuppagenumber[number=1]
\setuppagenumbering[alternative
1 - 100 of 131 matches
Mail list logo
